Technical Specs

System Architecture

It just works. Bean and Bean+ were designed to provide a magical experience where you don't have to know anything about Bluetooth to use it. However, if you're interested in digging deeper, here are diagrams detailing their architectures:

Bean

Bean system architecture

Bean+

Bean system architecture

The advantages of this system design are:

  • More pins for the user: The accelerometer and RGB LED don't take up any pins or peripherals of the ATmega.
  • Impossible to brick: Since the CC2540 handles the BLE stack instead of the ATmega, you can't get Bean into a state where it's impossible to reprogram.
  • Bean works without an Arduino sketch: You can access peripherals connected to the CC2540 independently of any Arduino code. For example, an iOS app can access the accelerometer directly without requiring the user to program a sketch that reads the accelerometer.

LightBlue Bean and Bean+

Bean features

Features

  • Built-In Protoboard: Making something with just a couple components? Solder and wire them right on Bean's prototyping area.
  • Small Size: The perfect size for tiny projects, Bean is really small! Need more space? It's totally OK to cut off the protoboard.
  • Coin Cell Battery: Bean ships with a coin cell battery included. You can start hacking before you even take it out of the box.
  • Program Wirelessly: No more digging your board out of your project enclosure: Bean is programmed wirelessly over Bluetooth Low Energy!
  • Cross-Platform: Compile and upload sketches with Bean Loader for Windows, OS X, iOS, and Android. Bean also has SDKs for iOS, OS X, and Android for native app development.
  • Arduino-Compatible: Bean Loader integrates with the Arduino IDE for Windows and OS X. Your favorite Arduino libraries work on Bean too.
  • Built-In Peripherals: Bean comes with an accelerometer, a temperature sensor, and an RGB LED. Start building right away—no soldering necessary.

Bean+ Additional Features

Bean+ has all the features of the original Bean, plus these extras

  • Rechargeable LiPo: It's easy to keep Bean+ going. The included lithium polymer battery charges via Micro USB, so power is never out of reach.

  • Boosted Range: With a new RF amplifier, the Bean+ can communicate with other Bean+'s from up to 400 meters (1,300 ft) under ideal conditions, or 250 meters (820 ft) to your smartphone.

  • Grove Connectors: Just connecting a couple of components? Bean+ has two built-in Grove ports for easy and quick component connection.

  • Addon Board Support: We make addon boards to add more functionality to your Bean+. If you want to connect your own parts, you can assemble and plug in your custom addon board.

  • Dual-Voltage Operation: Bean+ operates at a user-selectable 3.3V or 5V. No more adding logic level converters just to talk to your fancy graphic LCD.

Microcontroller Specifications

Arduino sketches run on the ATmega328p microcontroller. This is the same part that is common to most original Arduinos and provides the most compatibility with example code.

Bean

  • ATmega328p microcontroller @ 8 MHz
  • 32KB Flash memory, 2KB SRAM
  • 8 GPIO pins
  • 2 analog input pins on a 10-bit ADC
  • 4 pins with PWM support
  • 1 SPI port
  • 1 I²C port
Bean Arduino Reference

Bean+

  • ATmega328p microcontroller @ 8 MHz
  • 32KB Flash memory, 2KB SRAM
  • 16 accessible I/O pins
  • 6 analog input pins on a 10-bit ADC
  • 4 pins with PWM support
  • 1 SPI port
  • 1 I²C port
Bean Arduino Reference

Electrical Specifications

Bean is powered directly from the onboard CR2032 coin cell battery.

  • Recommended Operating Voltage Range: 2.6 to 3.6V
  • Maximum Operating Voltage Range: 2.0 to 3.6V.
    Note: Below 2.6V, the blue and green LEDs may not turn on.
  • Operating Temperature Range: -40°C to 85°C

Bean+ can be powered from the included rechargeable battery or directly from a USB cable. It supports 2 operating voltages: 5V and 3.3V.

  • Battery Specifications 3.7V 600maH LiPo Rechargeable Battery
  • Operating Voltage Range (USB): 5V +/- 10%
  • Maximum Current @ 5V: .6A
  • Maximum Current @ 3.3V: 1A
  • Operating Temperature Range:
    • Charging: 0°C to 45°C
    • Discharging: -20C to 45C

Bean+ RF Specifications

  • Maximum Output Power: 8dBm
  • Maximum Range(Bean+ to Bean+): 400 m
  • Maximum Range(Bean+ to smartphone): 250 m